Date/Time
25/02/2017
9:15 am - 5:00 pm
Location: 331 3750 46 Ave SE
331 3750 46 Ave SE, Calgary, Alberta, T2B0L1
Total Spaces: 45
Booked Spaces: 52
Available Spaces: -7
Date/Time:
25 Feb 2017
9:15 am-5:00 pm
Location:
331 3750 46 Ave SE, Calgary
T2B0L1
Category:
Professional Event
Overview
In late November, the Federal Government approved the Trans Mountain pipeline and Enbridge’s Line 3 replacement. It is expected that Kinder Morgan’s Trans Mountain $6.8B expansion will triple the capacity of an existing line from Edmonton to Burnaby and create hundreds of jobs in pipeline sector. Enbridge Line 3 will replace an existing line and increase oil transport to 760,000 barrels per day from Alberta to Wisconsin. Keeping this in mind, NEDAAAB Elected Committee has decided to conduct a course on Pipeline.
This course will briefly discuss the engineering deliverables used in the EPC/EPCM industry. We have focused on those contents that are relevant from an EPC perspective and cover most relevant deliverables for Pipeline Engineering.
Note: Based on interested from Edmonton and other areas of Alberta, NEDAAAB has decided to launch this event through webinar as well. However, this webinar option could be availed by only first five interested candidates. Fee for webinar attendee will be 40 CD.
Design For:
Junior/Intermediate Mechanical Engineers, Junior/Intermediate Facilities Engineer, Junior Pipeline Engineer, Materials Engineers, Industrial Engineers, Junior/Intermediate Pipeline industry Project Engineers and all those who need to improve their basic understanding of pipeline industry.
Course Outline
1 Introduction to Elements of Pipeline Design
1.1 Definitions
1.2 Pipeline Systems (Gathering, Transmission and Distribution)
1.3 Fluid Properties
1.4 Materials for Pipelines
1.5 Effects of Pressure and Temperature
2 Pipeline Routing, Survey and Geotechnical Guidelines
2.1 Preliminary Route Selection
2.2 Brief Discussion on ROW Survey and Geotechnical Considerations
3 Pipeline Mechanical Design
3.1 High Vapor Pressure and Low Vapor Pressure
3.2 Class Location
3.3 Pressure Design Formula for Steel Pipe
3.4 Restrained and Unrestrained Pipes
3.5 Pipeline Stress Limits
3.6 Depth of Cover and Clearances
3.7 Valve Assemblies
3.8 Scraper Traps (Pig Traps)
3.9 Pipeline Crossings
4 Pipeline Materials
4.1 Brief discussion on Pipeline Materials and Notch Toughness Requirements for cold weather
5 Pipeline Construction
5.1 Brief discussion on Pipeline Construction
6 Pipeline Pressure Testing
6.1 Purpose of Pressure Testing
6.2 Pressure Testing Medium
6.3 Pressure Testing Limits (Strength and Leak Tests)
6.4 Test Head Assemblies
6.5 Water Sources
6.6 Disposal of Water
6.7 Drying and Cleaning
6.8 Tie-ins and Commissioning
7 Special Topics
7.1 Oilfield Steam Distribution Pipelines
7.2 Aboveground Pipeline Design
7.3 Composite Reinforced Steel Pipelines
8 Pipeline Engineering Drawings
8.1 Base Maps and Survey Plans
8.2 LiDAR Profiles
8.3 Pipeline Schematics (PFDs)
8.4 Alignment Sheets
8.5 Right of Way Configuration Drawings
8.6 Crossing Drawings
8.7 Pipeline Typical
8.8 HDD Drawings
8.9 Valve Site Plot Plans
9 Pipeline Engineering Deliverables (From EPC Point of View)
9.1 Project Execution Plan (PEP)
9.2 Design Basis Memorandum (DBM)
9.3 Class 3 Cost Estimate
9.4 Pipeline Design Reports (Wall Thickness, Coating, Crossings, Valves, Bends, CP)
9.5 Pipeline Drawings
9.6 Mechanical Drawings
9.7 Process Drawings
9.8 Procurement (MTO, MRs, RFQ, RFP, Bid Tabs)
9.9 Construction Contract
INSTRUCTOR Salman Gul, M Eng, P.Eng
Mr. Salman Gul has a progressive ten years’ experience of working on variety of oil and gas projects in the upstream, midstream and downstream pipeline industry. Currently Mr. Gul is working as Senior Pipeline Engineer at Solaris Management Consultants Inc.. Mr. Gul has been working with Stantec, and with Amec Foster Wheeler in the past. He has also been involved in various pipeline and facility projects for exploration and producer companies including TCPL, Enbridge Gas Distribution, Spectra Energy, and FortisBC. The areas of expertise for Mr. Salman have been Pipeline Design, Construction Support, Integrity Management, Cost Estimates, and Schedules for cross country pipeline construction and design, Material Selection, Welding, NDT, and Pressure Testing.
EVENT TASK FORCE
- Khurram Tauheed (NEDAAAB EC Member)
- Mir Mahmood Ali
- Noaman Ahmed
- Salman Mohiuddin
BOOKINGS
This event is fully booked.
List of Attendees
- Syed Ammar Hussain
- Bilal Butt
- Ahad Khan
- Saleem Khan
- Adil Manzoor
- Adnan Khan
- Muhammad Faisal Chaudhry
- Rashid Hussain
- Sami Ahmed
- Muhammad Mustafa Siddiqui
- Muhammad Yousaf
- MUHAMMAD TAHA KHAN
- Muhammad Asim Farooqi
- Syed M Hasnain
- Nadeem Alam
- Mona ElBatanouny
- Adrian Nastase
- Arshad Khan
- Salim Syed
- imran khan
- Shams Zoha
- Faraz Masood
- Faheem Ahmed
- Saffi Gilani
- Mehran Shahzeb
- Walid Boukhobza
- Asad Khan
- Muhammad Ahmed
- Nasir Syed
- Andrew Ardianto
- SWAMINATHAN JAYARAMAN
- Tariq Mehmood
- Shoaib Shaikh
- Syed Asher
- Ghufran Ahmed
- Najeeb Mohammad
- Sohail Abdullah
- Muhammad Adil
- Syed Jawwad Ahmed
- Zubair Rahim
- Muhammad Sheeran Kukaswadia
- ISMAIL SHAIKH
- Salman Mohiuddin
- Khurram Sharafat
- Mumtaz Alam
- Liaquat ali
- jamie hu
- Abdul Ghaffar Lakho
- Touqeer Sohail
- Shakeel Anjum
